3.11 Platform Extension - JLG R4045 Operation And Safety Manual

3.11 PLATFORM EXTENSION

This machine is equipped with an extension deck that allows the oper-
ator better access to certain work areas. The deck extension adds
length to the front of the platform.
FOR MAXIMUM CAPACITY OF THE DECK EXTENSION SEE SECTION 6.2 OR REFER TO THE
CAPACITY PLACARD ON THE PLATFORM BILLBOARD.
DO NOT LOWER WITHOUT COMPLETELY RETRACTING THE PLATFORM EXTENSION.
To extend the deck:
1. Press foot down on locking mechanism lever (1) until it
clears the rear platform extension lock (3).
2.
While holding the lever, grasp the top handrails (2) and push
forward until the locking mechanism pin locks into the for-
ward platform extension lock (4 or 5).
To retract the deck:
1. Press foot down on locking mechanism lever (1) until it
clears the forward platform extension lock (4 or 5).
2.
Grasp the top handrails (2) and pull back until it the locking
mechanism pin locks into the rear platform extension lock
(3).
31215942
SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
1
3-17