Table of Contents
Advertisement
8.5.3 Viewing event memories
8.5.3.1 Viewing event logs
A6V10421795_en--_k
All events that happened in the fire detection system are stored in event logs. You
can view them one by one on the panel or view them all in a PC after uploading.
See 'Backing up event logs to the PC [➙ 118]' for more information about viewing
event logs in a PC.
There are 8 event categories:
●
Alarm
●
Fault
●
Technical
●
Isolation
●
Test
●
Activation
●
Information
●
Operation
The event lists are sorted chronologically and can be filtered by category and time.
When you view event logs, the displayed view is almost the same as 'Event views
[➙ 66]'. Device IDs in event logs are only visible for access level 3 or above, as is
the case with device IDs in event views. In addition, the symbols '+', '-', 'c' are
displayed in front of the event type to indicate the processing status of the event:
1. '+': event in
2. '-': event out
3. 'c': operation on ↑ PMI
To view all events
1. Press
on the keypad. The 'Main menu' window is open.
Main menu
1 - System status
2 - Operation
3 - Event memory
4 - Login
5 - Lamp test
7 - Logout
2. Select 'Event memory' and press
Event memory
1 - Event log
3 - Compensation Value
3. Select 'Event log' and press
Operations under access level 2
L2
. The 'Event memory' window is open.
L2
. The 'Event log' window is open.
Operation
8
81 | 151
Advertisement
Table of Contents
