Table of Contents
Advertisement
Engineering
9
Detector line
9.4 Detector line
9.4.1 Restarting
9.4.2 Powering off
90 | 151
The 'Restart' function is used to restart a ↑ detector line.
1. Press
on the keypad.
The 'Main menu' window is open.
2. Select 'Engineering' and press
The 'Engineering' window is open.
3. Select 'Detector line' and press
The 'Detector line' window is open.
4. Select 'Restart' and press
The 'Restart' window is open.
5. Select one desired detector line and press
A confirmation dialog window is open.
6. Press
to confirm.
The line is restarted.
The message 'Line startup is in progress...' is displayed. The panel returns to
previous status after restart.
The 'Power off' function is used to power off a ↑ detector line.
1. Press
on the keypad.
The 'Main menu' window is open.
2. Select 'Engineering' and press
The 'Engineering' window is open.
3. Select 'Detector line' and press
The 'Detector line' window is open.
4. Select 'Power off' and press
The 'Power off' window is open.
5. Select one desired detector line and press
A confirmation dialog window is open.
6. Press
to confirm.
The detector line is powered off.
Restart the detector line to power it on.
.
.
.
.
.
.
.
.
A6V10421795_en--_k
Advertisement
Table of Contents
