Checking The Paper Thickness Lever - Epson Stylus Color 200 User Manual

Color inkjet printer
Hide thumbs Also See for Stylus Color 200:
Table of Contents

Advertisement

12. Close the printer cover.
Caution:
c
Never turn off the printer while the Power light is flashing.
When you switch between print head units, always leave the
ink cartridge installed. Once you remove a cartridge, do not
reuse it. Reusing a cartridge that has been removed may
damage the print head.
Use only genuine EPSON ink cartridges and do not refill
them. Other products may cause damage not covered by
EPSON's warranty.
When you want to print in color again, replace the
monochrome print head unit with the color print head unit
as described in Chapter 5.

Checking the Paper Thickness Lever

Before you load paper, make sure that the paper thickness
lever, which controls the distance between the paper and the
printer carriage, is set correctly. The paper thickness lever is on
the top right side of the printer, next to the paper support. For
now, it should be set to the plain paper setting (forward).
1-14
Setting Up the Printer
thick paper
setting
plain paper
setting

Advertisement

Table of Contents
loading

Table of Contents