Epson Stylus Color 200 User Manual page 26

Installing the black ink cartridge
Follow these steps to remove the color print head unit and
install the monochrome print head unit and black ink cartridge:
1. Make sure the printer is on and the printer cover is open.
2. Hold down the Load/Eject button for about five seconds
until the print head unit moves slightly left to the ink
cartridge install position. The Power light flashes.
3. Raise the blue print head unit release lever as far as it will go.
release lever
c
4. Grasp both sides of the print head unit and carefully lift it out
of the printer. Place the print head unit on a flat, clean surface.
Caution:
Do not lift up the ink cartridge clamp; the ink cartridge
and print head may become unusable.
Setting Up the Printer
1-11