Epson Stylus Color 200 User Manual page 55

3. Slide the left edge guide against the left edge of the paper;
then push up the lock lever to secure its position.
4. Remove the paper, fan the stack, and tap the edges against a
flat surface to even it up.
5. Reload the paper straight down into the printer as shown.
Then rest it against the paper support.
6. Change the Media Type and other printer driver settings so
they are appropriate for the paper or labels you loaded. For
more information, see Chapter 2. (For labels, select Plain
paper as your Media Type.)
Paper Handling
3-7