Epson Stylus Color 200 User Manual page 96

Then check your bidirectional spool settings. Click Start, point
to Settings, and select Printers. Double-click the EPSON Stylus
COLOR 200 icon, open the Printer menu, and select
Properties. Click the Details tab, select Spool Settings, and
make sure the Enable bi-directional support for this printer
option is turned on. Click OK. The Status Monitor should now
appear when you send your next print job.
The printer does not seem to receive print jobs sent by the
computer.
Double-click Spool Manager3 in the EPSON program group
or folder; then click any job marked pending or held. Open the
Document menu and select Delete. To verify that the print
queue is not held, open the Queue menu and click Hold if there
is a checkmark beside the option. Also change the Spool
Manager default directory as described on page 6-10.
Make sure EPSON Stylus COLOR 200 is selected as the default
Windows printer driver.
If you still get no output, try printing a demonstration page to
see if the problem is with your printer; see Chapter 4 for
instructions. If no demonstration page prints, you may have a
problem with your printer; contact your EPSON dealer or
authorized EPSON servicer.
If the demonstration page prints, you may have a problem with
your application software or your printer cable. Make sure
your cable is connected securely and see your program's
documentation for troubleshooting information.
6-12
Troubleshooting