Selecting The Correct Ink Cartridges; Removing And Installing An Ink Cartridge - Epson Stylus Color 200 User Manual

Caution:
c
When you discard your used ink cartridge, always remove it
from the print head unit first; do not discard the print head
unit.
Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one. Once
you remove a cartridge, you cannot reuse it.

Selecting the Correct Ink Cartridges

Use only these EPSON ink cartridges:
Black ink cartridge
Color ink cartridge
When you need new ink cartridges, contact your dealer or call
EPSON Accessories at (800) 873-7766 (U.S. only). In Canada,
call (800) BUY-EPSON for sales locations.
Caution:
c
Use only genuine EPSON cartridges and do not refill them.
Other products may cause damage not covered by EPSON's
warranty.

Removing and Installing an Ink Cartridge

Follow these steps to replace an ink cartridge:
1. Make sure the printer is on and not printing, and the Ink Out
light is flashing or turned on.
2. Open the printer cover by lifting the edges on both sides.
3. Hold down the Load/Eject button for about five seconds
until the print head moves slightly left, to the ink cartridge
install position. The Power light begins flashing.
S020047
S020097
Maintenance
5-7