Epson Stylus Color 200 User Manual page 25

8. Press down the ink cartridge clamp until it locks in place.
You will feel some resistance.
c
9. Press the Load/Eject button again to return the print head
to its home position. (Even if you do not press Load/Eject,
the print head moves back to its home position about
60 seconds after you close the clamp.)
The printer charges the ink delivery system for about two
minutes. During this time, the Power light flashes. When
the printer is finished charging, the Power light stays on.
c
1-10
Setting Up the Printer
Caution:
Once you install an ink cartridge, do not open the ink
cartridge clamp again or remove the cartridge except to
replace it with a new one. Once you remove a cartridge, do
not reuse it; you may damage the print head.
Caution:
Never turn off the printer while the Power light is
flashing.