Installing The Printer Software; Installing The Software For Windows 3.1; Installing And Using The Printer Software - Epson Stylus Color 200 User Manual

This chapter describes how to install and use the EPSON Stylus
COLOR 200 printer software on your computer.
The printer software includes a printer driver, which allows
your computer to control the printer; you must install it to use
the printer. The printer driver lets you choose from a wide
variety of settings to customize the appearance of your printed
documents.
The printer software also includes the Spool Manager, which
manages your printing, and the Calibration Utility, which you
can use to adjust the vertical alignment of your printouts. See
Chapter 4 for information on the Spool Manager and Chapter 5
for instructions on using the Calibration Utility.
Note:
Be sure to make backup copies of your software diskettes.

Installing the Printer Software

If you are using Windows 3.1, follow the steps in the next
section to install the printer software. If you are running
Windows 95, see page 2-5 for instructions.

Installing the Software for Windows 3.1

1. Make sure your printer and computer are turned on and
Windows Program Manager is running.
2. Insert the Windows Setup disk 1 in a diskette drive.
3. In the File menu, select Run. You see the Run dialog box.
4. In the Command Line box, type A:SETUP (or B:SETUP
if you inserted the diskette in drive B). Press Enter or
click OK.
2-2

Installing and Using the Printer Software