Setting Up The Print Server; Connecting The Print Server - Epson Stylus C82WN Setup And Installation Manual

Setting Up the Print Server

Once the software is installed, you're ready to connect the print server to the printer
and configure it for your network. Before you start, make sure the printer is turned
off.

Connecting the Print Server

1. Slide the print server into the base and press firmly to
attach it.
2. Locate the parallel cable included with
the printer. Connect the larger end of
the cable to the printer's parallel port.
Then secure it with the wire clips.
3. Connect the other end of the cable to
the parallel port on the print server and secure it
as necessary.
18
Configuring Wireless Printing for Windows