Macintosh System Requirements - Epson Stylus C82WN Setup And Installation Manual

Macintosh System Requirements

For wireless printing with the EPSON Stylus C82WN, make sure each Macintosh
meets the following requirements:
An Apple iBook, iMac,
Power Mac G3 or G4
®
Mac OS 8.6 through 9.x; OS X 10.1 or later (Mac OS 9.1 or later
recommended)
For Mac OS 8.6 through 9.x: 32MB of available RAM (64MB recommended)
For Mac OS X: 128MB RAM (256MB recommended)
100MB of free hard disk space (200MB recommended)
VGA display or better
CD-ROM or DVD drive for installing the printer software
In addition, each computer either needs to have a wireless adapter installed, or needs
to be connected to an existing wired network that has a wireless access point or
AirPort Base Station.
Note: If you are using AirPort, EPSON recommends that you use the print server
with an access point or AirPort Base Station. With AirPort, your print server works
more reliably in infrastructure mode.
Make sure the access point supports AppleTalk.
points, see EPSON's web site at: http://support.epson.com.
For computers not connected to a wired network, you need an AirPort card or
Macintosh-compatible wireless adapter. Make sure your card or adapter works in
ad hoc mode if you want to print without an access point. For a list of supported
adapters, see EPSON's web site at: http://support.epson.com.
If you are using an AirPort card or the AirPort Base Station, use AirPort software
version 2.04 or later.
™
PowerBook G3 or G4, Power Mac G4 Cube, or
®
For a list of supported access
5
Introduction