Removing The Paper Cutter; Using The Printer Options - Epson DFX-8000 User Manual

Paper
Cutter
Note: You can use the ESC EM printer command to change tractors
only when the paper cutter is installed. For more information
about this command, see the Command Summary in Chapter 9.
CAUTION:
the first page is tom off exactly at the perforation, and the
first four holes in the paper fit over the sprocket unit pins.

Removing the paper cutter

To remove the paper cutter, follow the steps below. After you
remove the paper cutter, store it in its original box and packing
materials.
1. Cut off any printed document in the printer as described in the
section above on cutting off a printed document.
2. Turn off the printer.
5-28
Using
When you load paper on the tractor, be sure that
the
Printer
Options