Commands That Differ From Epson Esc/P Commands; Ibm Emulation Mode Commands Arranged By Topic - Epson DFX-8000 User Manual

IBM Emulation Mode Commands Arranged by Topic

The FF command does not work at the top of form position
l
when DIP switch 2-l is off in IBM emulation mode.
IBM emulation mode graphics are the ,same as Epson ESC/P
l
mode graphics except that ESC * , ESC 7, and ESC A are not
Commands that differ from Epson ,ESC/P commands
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Takes the printer off line until you turn the printer off and then
back on or until the printer receives a DC1 code.
Vertical motion:
F o r m a t :
ASCII code:
Decimal :
Hexadecimal:
Comments:
Executes the line spacing stored in memory by ESC A. If no ESC
A command has been sent, ESC 2 sets the line spacing to l/6 of
an inch.
Command Summary
9-42
Select Programmable Line Spacing
2
Deselect Printer