Power Supply - Epson DFX-8000 User Manual

Power Supply

Problem
Power is not being
supplied to the
printer.
POWER
The light does
not go on.
The POWER light
comes on briefly and
then goes 0%. The
stays ofi after
you turn the printer
off and then on
again.
Solution
The power cable may not be fully plugged
into the printer or the electrical outlet.
Turn off the printer and see that
is fully plugged into the printer and the
electrical outlet.
The power switch is off. Turn on the
switch.
The electrical outlet may not be supplying
power. Check if an outside switch or
automatic timer controls the
If
outlet. so, use a different outlet.
The electrical outlet may not work. Plug
another electrical device into the outlet to
check whether the outlet works.
The voltage supplied by the electrical outlet
not be
may correct for your printer. Check
the label on the printer's rear panel to see if
voltage
the printer's
your electrical outlet. If the voltages do not
match, unplug the printer and contact your
Epson dealer. Do not reconnect the power
an
cable to electrical outlet. See page
the
electrical
rating matches that of
Troubleshooting 7-3
cable
1-13.