Character Tables - Epson DFX-8000 User Manual

Character Tables

You can select the character tables in this section by setting DIP
switch 1-3 or using the ESC t software command.
In the tables, the first digit of each hex code is in the top row and
the second digit is in the first column. The binary digits are in the
second row and second column, and the decimal codes are in the
rectangle next to the character. For example, for an uppercase A,
the hex code is 41, the binary code is 01000001, and the decimal
code is 65.
Note: The printer can print the characters in the shaded areas
only if you send the ESC 6 command to the printer. If you do
not send the ESC 6 command, the shaded areas contain the
control codes in the range of 0 to 31 and 127.
A-6
Appendix