Userdefined Characters - Epson DFX-8000 User Manual

Epson ESC/P Commands Arranged by Topic
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This command defines characters in the currently selected mode.
This command does not work when DIP
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This command copies the characters in the ROM into RAM so
that specific characters can be redefined. This command does not
work when DIP switch 2-l is on. One of the,NI.Q fonts is copied
depending on the value specified for
Roman
9-36 Command summary
characters
Define User-defined Characters
0 nl n2 al dl d2 . . . . . dn
0 nl n2 al dl d2 . . . . . dn
0
0
switch
Copy ROM into RAM
0
0