Paper Handling - Epson DFX-8000 User Manual

6.
Open the paper bail using the tab on its right side. Then tilt the
pull tractor back until its rear latches click into place over the
printer's rear mounting pins.
7.
Close the paper bail and then close the top cover.

Paper handling

If you are using labels or multi-part forms with more than four
parts including the original, use the pull tractor with the built-in
front tractor.
You can switch between the front and rear tractors at any time
when you are using the pull
button and then use the FORM FEED button to feed the paper the
additional distance to the
handling. gee the'section on labels in Chapter 2.)
WARNING:
the pull tractor is installed. To remove a document, press
the FORM FEED button to advance the paper to a point
where you can tear it off.
Just press the FRONT/REAR
tractor.
pull
tractor. (Labels require special
The short tear-off feature does not work when
Using the Printer Options
Pull Tractor
5-5