Proportional Width Table
This table lists the widths of your printer's proportional characters.
The values given are in 12Oths of an inch. (For example, a value of
into a special table for your word processing program so it can
calculate the number of proportional characters that will fit on a
line.
The characters with no code indicated are internationel chnracters
or graphics. See the section on selecting an internatioq6jl character
set in Chapter 3 and the descriptions of the ESC R and ESC t
commands in Chapter 9 for information on how to use these
The following width table shows each character, its ASCII code
(hexadecimal), and its width. If there are two numbers in the width
column, the second one is for the italic version of the character.
code
Width
Width