Table of Contents
Advertisement
G0638—10hp 3-ph cyclone Dust collector
our largest dust Collector features a whopping
4029 CFm capacity and can handle any large
duct system with a static pressure loss less than
16.8" of water. dual collection drums minimize
the down time necessary for emptying dust and
chips and the noise reducing exhaust manifold
keeps the noise level below 87 dB. the ramped
air intake is so efficient, there is very little fine dust
that makes it to the plastic filter bags and with a
99.9% filter efficiency rating, essentially no dust
escapes. the steel stand is included.
Figure 108. g0638 10hp Cyclone dust
Collector.
-64-
G7581—Superbar™
G7582—Master plate
the miter slot mounted superbar™ will align, tune
and calibrate your tablesaw to within ±.001 in just
minutes. replace your tablesaw blade when cali-
brating the double disk ground master plate for a
precision measurement, with no runout!
Figure 109. superbar™ and master plate.
model g0651/g0652 (mfg. since 1/10)
Advertisement
Table of Contents
