Table of Contents
Advertisement
To use the air compressor to inflate a tire with air only
and not sealant:
6-84
Always do a safety check first. See
.
1. Remove the tire sealant and compressor kit from
its storage location. See
2. Unlock the air only hose (F) from the sealant
canister (B) by pulling up on the lever.
3. Pull the air only hose (F) from the sealant
canister (B).
4. Remove the power plug (C) from the air
compressor (A).
5. Place the kit on the ground.
Make sure the tire valve stem is positioned close to
the ground so the hose will reach it.
6. Remove the tire valve stem cap by turning it
counterclockwise.
7. Attach the air only hose (F) onto the tire valve stem
and push the lever down to secure it.
.
Advertisement
Table of Contents
