Table of Contents
Advertisement
Press once to lock the doors. The light on
the front doors comes on and the turn signals flash.
If
is pressed twice, the horn will also sound.
See Lights Flash at Lock and Horn Chirps at Lock
under Vehicle Personalization on page 3 58 to change
the feedback feature.
Press once to unlock the driver door.
The turn signals flash twice. Press
five seconds to unlock all the doors. The interior lamps
may come on.
See Lights Flash at Unlock and Ext. (Exterior) Lights
at Unlock under Vehicle Personalization on page 3 58
to change the feedback feature.
3-6
Vehicles with the memory feature can be programmed
to recall memory settings when
keyless access transmitter. See Memory Seat, Mirrors
and Steering Wheel on page 3 75 for more information.
feature. See Remote Vehicle Start on page 3 10.
engine is running, the shift lever must be in P (Park).
to locate the vehicle. The horn sounds three times and
the turn signal lamps flash three times. Press and hold
The horn sounds and the turn signal lamps flash for
30 seconds. Press and release
panic alarm.
The vehicle comes with two transmitters. Each
transmitter will have a number on top of it, 1 or 2 .
These numbers correspond to the driver of the vehicle.
For example, the memory seat position for driver 1 will
be recalled when using the transmitter labeled 1 ,
if enabled through the vehicle personalization.
twice within
See Memory Seat, Mirrors and Steering Wheel on
page 3 75 and Vehicle Personalization on page 3 58
for more information.
Press to operate the remote start
Press and hold to unlock the trunk. If the
for three seconds to sound the panic alarm.
is pressed on the
Press and release
again to cancel the
Advertisement
Table of Contents
