Table of Contents
Advertisement
The windshield washer button is located at the end of
the windshield wiper lever on the right side of the
steering column.
Press and hold to spray
windshield washer fluid on the windshield. The washer
will spray until the button is released. The wipers will
continue to clear the window for about six seconds after
the button is released and then stop or return to the
preset speed.
In freezing weather, do not use your washer until
the windshield is warmed. Otherwise the washer
fluid can form ice on the windshield, blocking your
vision.
If the fluid in the windshield washer fluid reservoir is low,
the message CHECK WASHER FLUID will appear on
the Driver Information Center (DIC) display. It will take
60 seconds after the bottle is refilled for this message to
turn off. For information on the correct washer fluid
mixture to use, see Windshield Washer Fluid on
page 6 36 and Recommended Fluids and Lubricants
on page 7 9.
For vehicles with headlamp washers, they are located
to the inside of the headlamps.
Press
located at the end of the windshield wiper
lever, to wash the headlamps and windshield. After the
first wash, the headlamps will be washed after the fifth
press of the windshield washer button.
The headlamps must be on to be washed. If the washer
fluid is low, the headlamp washers will not work.
See Windshield Washer on page 4 11 for additional
information.
4-11
Advertisement
Table of Contents
