Table of Contents
Advertisement
After you have removed the sight shields (if equipped) on the 4.6L V8 engine, here is what you will see:
A. Remote Negative (-) Terminal. See
.
B. Remote Positive (+) Terminal. See
.
C. Battery. See
D. Passenger Compartment Air Filter. See
E. Power Steering Fluid Reservoir. See
F. Engine Oil Fill Cap. See When to Add Engine Oil
under
G. Engine Oil Dipstick (Out of View). See Checking
Engine Oil under
H. Brake Master Cylinder Reservoir. See Brake
Fluid under
.
.
.
.
.
.
I. Engine Coolant Surge Tank and Pressure Cap.
See
J. Engine Air Cleaner/Filter. See
K. Underhood Fuse Block. See
L. Windshield Washer Fluid Reservoir. See Adding
Washer Fluid under
.
If your vehicle is equipped with front compartment
underhood sight shields, before closing the hood be
sure to reinstall the sight shields. To reinstall the
shields, locate the tabs on the left and right sides and
insert them into the openings in the tower to tower
brace. Then insert the fasteners into the top of the
shield and push the fasteners back into place.
.
.
.
6-17
Advertisement
Table of Contents
