Table of Contents
Advertisement
Use this gear to back up.
At low vehicle speeds, you can also use R (Reverse) to
rock your vehicle back and forth to get out of snow, ice,
or sand without damaging the transmission. See If Your
Vehicle is Stuck in Sand, Mud, Ice, or Snow on
page 5 22 for additional information.
In this position, the engine does not
connect with the wheels. To restart the engine when the
vehicle is already moving, use N (Neutral) only. You can
also use N (Neutral) when the vehicle is being towed.
Shifting into a drive gear while the engine is
running at high speed is dangerous. Unless your
foot is firmly on the brake pedal, the vehicle could
move very rapidly. You could lose control and hit
people or objects. Do not shift into a drive gear
while the engine is running at high speed.
This position is for normal driving.
It provides the best fuel economy. If you need more
power for passing, and you are:
Going less than 35 mph (55 km/h), push the
accelerator pedal about halfway down.
Going about 35 mph (55 km/h) or more, push the
accelerator all the way down.
The transmission will shift down to a lower gear
and have more power.
Downshifting the transmission in slippery road
conditions could result in skidding, see Skidding under
Loss of Control on page 5 14.
3-31
Advertisement
Table of Contents
