Table of Contents
Advertisement
1. Press and hold
responds with Ready followed by a tone.
2. After the tone, say Re dial . The system responds
with Re dial using <phone name> and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.
When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
Press
and begin speaking to answer the call.
Call waiting must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.
Press
to answer an incoming call when
another call is active. The original call is placed
on hold.
Press
again to return to the original call.
To ignore the incoming call, continue with the
original call with no action.
4-120
for two seconds. The system
Three Way Calling must be supported on the Bluetooth
phone and enabled by the wireless service carrier
to work.
1. While on a call press
with Ready followed by a tone.
2. Say Three way call . The system responds with
Three way call, please say dial or call .
3. Use the dial or call command to dial the number of
the third party to be called.
4. Once the call is connected, press
the callers together.
To end a call:
1. Press
. The system responds with Ready
followed by a tone.
2. Say End Call . The call is then ended.
During a call, all sounds from inside the vehicle can be
muted so that the person on the other end of the call
cannot hear them.
. The system responds
to link all
Advertisement
Table of Contents
