Table of Contents
Advertisement
Use the buttons located on the steering wheel to
operate the in vehicle Bluetooth system. See Audio
Steering Wheel Controls on page 4 134 for more
information.
to confirm system information, and to start speech
recognition.
A Bluetooth enabled cell phone must be paired to the
in vehicle Bluetooth system first and then connected to
the vehicle before it can be used. See the cell phone
manufacturers user guide for Bluetooth functions
before pairing the cell phone. If a Bluetooth phone is
not connected, calls will be made using OnStar
Hands Free Calling, if available. Refer to the OnStar
owner's guide for more information.
Pairing Information:
Up to five cell phones can be paired to the
in vehicle Bluetooth system.
The pairing process is disabled when the vehicle is
moving.
The in vehicle Bluetooth system automatically links
with the first available paired cell phone in the
order the phone was paired.
4-114
Press to answer incoming calls,
Only one paired cell phone can be connected to
the in vehicle Bluetooth system at a time.
Pairing should only need to be completed once,
unless changes to the pairing information have
been made or the phone is deleted.
To link to a different paired phone, see Linking to a
Different Phone later in this section.
1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say Pair . The system responds with instructions
and a four digit PIN number. The PIN number will
®
be used in Step 4.
4. Start the Pairing process on the cell phone that will
be paired to the vehicle. Reference the cell phone
manufacturers user guide for information on this
process.
Locate the device named General Motors in
the list on the cellular phone and follow the
instructions on the cell phone to enter the four digit
PIN number that was provided in Step 3.
for two seconds. The system
Advertisement
Table of Contents
