Table of Contents
Advertisement
Turns the exterior lamps on and
off automatically depending upon how much light is
outside of the vehicle.
The automatic lights may be disabled even if the control
is in the AUTO position.
To enable automatic lighting do any of the following:
Turn the headlamp control from AUTO to off and
release the switch. It returns back to the AUTO
position by itself.
Turn the headlamp control from the parking lamp
position to AUTO.
Turn the headlamp control from the headlamp
position to AUTO.
To disable automatic lighting do any of the following:
Turn the headlamp control from AUTO to off and
release the switch. It returns back to the AUTO
position by itself.
Turn the headlamp control from AUTO to the
parking lamp position.
Turn the headlamp control from AUTO to the
headlamp position.
Disabling automatic lighting disables the automatic
headlamp operation, DRL, and IntelliBeam
High-Beams (if the vehicle has them).
4-28
together with the following:
Sidemarker Lamps
Taillamps
License Plate Lamps
Instrument Panel Lights
Turns on the headlamps, together
with the previously listed lamps and lights.
For vehicles with IntelliBeam, read this entire section
before using this feature.
IntelliBeam is an enhancement to the vehicle's
headlamp system. It uses a light sensor located on
the back of the rearview mirror to turn the high-beam
headlamps on and off depending on approaching traffic.
The IntelliBeam system turns the high-beam headlamps
on when it is dark enough, there is no other traffic
present, and the IntelliBeam system is enabled.
the IntelliBeam button on the inside rear view mirror.
The indicator on the mirror turns on. Once the system
Turns on the parking lamps
Press and release
Advertisement
Table of Contents
