Appliance Description; Ordering Fuel - Viessmann VITOLIGNO 300-C Operating Instructions For The System User

Pellet boiler, 60 to 101 kw, with weather-compensated ecotronic boiler and heating circuit control unit
Table of Contents

Advertisement

Introductory information
Intended use
(cont.)
Any usage beyond this must be approved by the man-
ufacturer in each individual case.

Appliance description

The Vitoligno 300-C is an automatic boiler suitable for
burning wood pellets.

Ordering fuel

Approved pellets
Quality
Diameter
Delivery methods
Pellets are sold in 15 to 30 kg sacks, in bulk cartons up
to 1000 kg and in bulk.
Loose pellets are transported by silo tanker and blown
into the storage room via a hose system.
Commissioning
Commissioning and adjusting the control unit to local
conditions and the building characteristics must be car-
ried out by your heating contractor.
Installation and service instructions
As the user of new combustion equipment, you may be
obliged to notify your local flue gas inspector of the
installation [check local regulations]. Your local flue gas
inspector [where applicable] will also provide you with
information on additional activities concerning your
combustion equipment (such as regular testing, clean-
ing, etc.).
8
To EN ISO 17225-2
A1
6 mm
Incorrect usage or operation of the appliance (e.g. the
appliance being operated for longer periods when
open) is prohibited and will result in an exclusion of lia-
bility. Incorrect usage also occurs if the components in
the heating system are modified from their intended
use (e.g. if the flue gas and ventilation air paths are
sealed) or if other fuels than those intended for this
appliance are used.
Prepare and carry out the emissions test according to
the 1st BImSchV:
Installation and service instructions

Advertisement

Table of Contents
loading

Table of Contents