Blocking Times For Automatic Fuel Supply - Viessmann VITOLIGNO 300-C Operating Instructions For The System User

Pellet boiler, 60 to 101 kw, with weather-compensated ecotronic boiler and heating circuit control unit
Table of Contents

Advertisement

Blocking times for automatic fuel supply

Blowing pellets into the pellet storage room results in
an uneven dumping height of pellets inside the store.
In order to enable the pellet store to be emptied uni-
formly, the proportion of supply volume (assignment in
%) can be adjusted individually for each suction wand.
Changeover unit
90 %
1
2
3
4
Select with
Fig. 33
Press the following keys:
1.
for the "Extended menu".
å
2.
/
for "Charging".
|
~
3.
to confirm.
d
4.
/
for "Changeover unit".
|
~
5.
to confirm.
d
The adjustable suction wands are shown.
6.
/
for selecting the suction wand.
Ù
Ú
7.
to confirm.
d
The current fuel assignment in % (propor-
tion of supply volume) will be shown.
Changeover unit
Suction wand 2
90 %
Change with
Fig. 34
Purging and/or resetting suction wands
In the case of a shortage of pellets at one suction
wand, that wand will be blocked and a changeover to
the next suction wand occurs.
A blocked suction wand can be purged. A blocked
wand can also be re-enabled without prior purging. If
several wands have been selected for purging, these
wands will be purged in sequence. Afterwards, the
system will be restarted in standard mode.
Manual purging will only commence if the pellet hopper
on the boiler is not full.
(cont.)
8.
/
to select the required fuel assignment
|
~
value.
The fuel assignment per suction wand is
adjustable from 0 to 100 %.
When setting to 0 %, the suction wand is
blocked manually and not used.
9.
to confirm.
d
The suction wands available for selection
will be redisplayed.
10. Repeat steps 6 to 9 to select the assignment of fur-
ther suction wands.
11.
repeatedly until the standard menu is dis-
ä
played (see page 11).
Note
Check the suction wand assignment again when next
filling the pellet store and readjust the assignment if
required.
Press the following keys:
1.
for the "Extended menu".
å
2.
/
for "Charging".
|
~
3.
to confirm.
d
4.
/
for "Changeover unit".
|
~
Fuel supply
33

Advertisement

Table of Contents
loading

Table of Contents