Stopping Dhw Heating - Viessmann VITOLIGNO 300-C Operating Instructions For The System User

Time program
(cont.)
Setting time phases
Press the following keys:
1. for the "Extended menu".
å
2. / for "DHW".
| ~
3. to confirm.
d
4. / for "DHW time program".
| ~
5. to confirm.
d
6. / for "Individual".
| ~
7. to confirm.
d
8. / until the required part of the week or day
| ~
appears.
9. to confirm.
d
10. / to select the time phase.
| ~
The relevant time phase is represented by
a number ( ,
!
11. to confirm.
d
12. / to set the start point.
| ~
13. to confirm.
d
Deleting a time phase
1. Set the time for the end point to the same time that
was set for the start point.
The display shows "- - : - -".
2. Press
d to confirm.
Resetting time phases to factory settings
Note
The time phases for DHW heating are only reset to
factory settings when you reset all settings for "DHW".

Stopping DHW heating

Press the following keys:
1. repeatedly until the standard menu is dis-
ä
played.
, or ).
? § $
14. / to set the end point.
| ~
15. to confirm.
d
16. To set the beginning and end of further time pha-
ses, proceed as described in steps 10 to 15.
Example shown:
Time program for Monday to Friday ("Mo-Fr")
■
■ Time phase :
!
From 04:30 to 06:30 h
■ Time phase :
?
From 15:30 to 20:30 h
! ?
DHW Mo-Fr HC1
0 2 4 6 8 10 12 14 16 18 20 22 24
04:30 - 06:30 Std
!
u
15:30 - 20:30 Std
?
u
Select with
(
Fig. 24
Example:
You want to set the same time program for every day
except Monday:
Select the period "Monday
program.
Then select "Monday" and set the time program for
this.
DHW time program Mo-Su
0 2 4 6 8 10 12 14 16 18 20 22 24
? - -:- - - - -:- - ---
u
§ - -:- - - - -:- - ---
u
Change with
(
Fig. 25
The steps for restoring factory settings can be found
on page 37.
2. / for "DHW".
| ~
3. to confirm.
d
DHW heating
Sunday" and set the time
–
27