Setting Delivery Times For Fuel Supply; Matching The Control Unit To The Heating System - Viessmann Vitoligno 300-P Service Instructions For Contractors

Commissioning, inspection, maintenance
Further details regarding the individual steps
Note
Now a consumer actuator test should
be carried out (see page 29), even if
heating mode has been started.

Setting delivery times for fuel supply

The factory setting for the fuel delivery time is "Subj. to demand", meaning the fuel
supply system is controlled automatically. Specific times during which there should
be no fuel supply can be selected individually.
Operating instructions Vitoligno 300-P

Matching the control unit to the heating system

Subject to the equipment level, the control unit must be matched to the system. Var-
ious system components are recognised automatically by the control unit and the
relevant codes are adjusted automatically.
Check and possibly adjust all addresses
in Coding 1 (see chapter "Coding 1").
12
Note
Further optional adjustments are listed in
code 1 and 2.
(cont.)