Valid keys and submenu functions in this mode are as follows.
Valid keys
Menu
Cursor (↑/↓) keys
F1
EDIT
F2
JUMP
n
NOTE
When the port specifi ed by SIO is identical with the port used by the program, the
output results might be inaccurate.
1. Direct connection from SI n ( ) to DO n ( )
Serial port input can be directly connected to parallel port output. The relation of the
parallel port and serial port that can be connected is as follows.
Output device such as valve
DO port ←SI port
DO2()
DO3()
DO4()
DO5()
n
NOTE
When the port specifi ed by SIO is identical with the port used by the program, the
output results might be inaccurate.
[Operation]
1. Select an SI port (from items 1 to 4) in the "SYSTEM > OPTION > SIO" mode.
2. Press the
(EDIT) key.
F 1
SYSTEM>OPTION>SIO V8.01
1.Direct SI2() −> DO2() NO
2.Direct SI3() −> DO3() NO
3.Direct SI4() −> DO4() NO
4.Direct SI5() −> DO5() NO
5.Direct SO2() <− DI2() NO
SET NO
3. Press the
(SET) key to enable the connection or the
F 1
the setting.
4. Press the
key to quit setting or select another SI port with the cursor keys to
ESC
continue setting.
4. Direct connection by emulated serialization on parallel DIO
Selects SIO parameters.
Sets SIO parameters.
Jumps to specified SIO parameter.
SI2()
SI3()
SI4()
SI5()
Function
F 2
(NO) key to cancel
3-9
Chapter
3