Setting The Communication Speed - Yamaha RCX Series User Manual

3. Setting the CC-Link compatible module
c
CAUTION
• Never directly touch the conductive sections or electronic parts other than
the rotary switch on the CC-Link compatible module.
• Do not apply impact on the CC-Link compatible module.
• Do not place water or conductive matters, etc., which could cause damage
Chapter
near the CC-Link compatible module.
2
• Accurately set the station No.
• When setting the BPS, make sure not to set the rotary switches MSB and LSB
by mistake.
3.2

Setting the communication speed

Using the rotary switch BPS in front of the CC-Link compatible module, set the
communication speed for the robot controller in the CC-Link system.
n
NOTE
The communication speed must match the CC-Link system's master station
setting.
2-4
BPS
Front of the unit