Honeywell BC-200 Operation, Installation & Programming Manual page 65

Panel Operation
Input modules:
FLASHSCAN MENU – PROG
DAY MODE
20 JULY 2002 14:44:37
SELECTED POINT : L1M1
L1M1 > BREAK GLASS MAIN FOYER
DEVICE TYPE > FMM-101/MMX-1010 MINI MON
ZONE NO. > 2
ZONE TYPE > MCP
ALARMED? (Y/N) > Y
LATCHED? (Y/N) > Y
TIMED? (Y/N)
AVF? (Y/N)
Output modules:
FLASHSCAN MENU – PROG
DAY MODE
20 JULY 2002 14:44:37
SELECTED POINT : L1M10
L1M10 > EWIS OUTPUT #1
DEVICE TYPE > FRM-1/CMX-2 RELAY O/P
Once the output module name and type has been saved, you will then be transferred to the script entry screen
and be prompted to enter a script for the output. Please refer to page 90 for more information on entering scripts.
BC-200 Manual – P/N DOC-01-013
A = 0
F = 0
I = 0
N = 0
> N
> N
BACKSP
ENTER
A = 0
F = 0
I = 0
N = 0
BACKSP
ENTER
Actions:
Press the BACKSP button to delete an incorrect
character.
Press the ENTER button to step through options.
Press the YES or NO buttons when highlighted to
answer Y/N options.
Use external QWERTY keyboard to edit descriptors
and zone type.
The numerical keypad can be used for numerical
entries.
When entering device type a numerical pick list will
appear at the bottom of the screen.
Refer to appendix for more information on options and
sensitivity settings.
You will be prompted Yes/No to save changes when
finished.
Actions:
Press the BACKSP button to delete an incorrect
character.
Press the ENTER button to step through options.
Press the YES or NO buttons when highlighted to
answer Y/N options.
Use external QWERTY keyboard to edit descriptors
and zone type.
The numerical keypad can be used for numerical
entries.
When entering device type a numerical pick list will
appear at the bottom of the screen.
Refer to appendix for more information on options and
sensitivity settings.
You will be prompted Yes/No to save changes when
finished.
65