Honeywell BC-200 Operation, Installation & Programming Manual page 30

Panel Operation
7.3.3.3 S
ERVICE
This will display any isolation conditions active at the time.
ISOLATE LIST
DAY MODE
20 JULY 2002 14:44:37
TIME TYPE
20 JULY 10:00 SMOKE
L1D1 PENTHOUSE
20 JULY 12:15 HEAT
1.10.Z1 STAIRWELL
PREV NEXT
Note: You can also use the arrow keys, the Page Up and Page Dn keys on an external keyboard for scrolling
functions.
7.3.3.4 S
ERVICE
This list will display all non-alarm points that are currently active. If points are set as latching, this is where they
will need to be manually reset. If points are non-latching, they will self-clear.
ACTIVE LIST
DAY MODE
20 JULY 2002 14:44:37
TIME TYPE
20 JULY 10:00 SMOKE
L1D1 PENTHOUSE
20 JULY 12:15 HEAT
1.10.Z1 STAIRWELL
PREV NEXT ACKN
Note: You can also use the arrow keys, the Page Up and Page Dn keys on an external keyboard for scrolling
functions.
BC-200 Manual – P/N DOC-01-013
M – L – I
ENU IST
A = 0
F = 0
I = 2
N = 0
STATUS NUMBER
ISOL 1 OF 2
ISOL FAULT 2 OF 2
DEISOL MENU
M – L – A
ENU IST
A = 0
F = 0
I = 1
N = 2
STATUS NUMBER
ACTIVE 1 OF 2
ISOL ACTIVE 2 OF 2
RESET ISOL
SOLATED
Actions:

Use the PREV and NEXT buttons to scroll
through the isolated points.

Use DEISOL to De-Isolate the currently selected
isolated point.

Press MENU to return to the Service menu
CTIVE
Actions:

Use the PREV and NEXT buttons to scroll
through the active Non-Alarm AZF.

Use ACKN to acknowledge currently highlighted
active non-alarm AZF.

Use RESET to reset the currently highlighted
active non-alarm AZF.
You will be asked to press ACKN to confirm, press
any other button to abort.

Use ISOL to isolate the currently highlighted active
Non-Alarm AZF.
You will be asked to press ACKN to confirm, press
any other button to abort.
30