Riello Array AR 399 SE Installation, Operation And Service Manual page 44

OPERATION
Modified service functions: (select the modified service functions and enter the values here).
Example: Vent Length Parameter changed from 1 to 2
Heating control:
Gas type setting (par 98 "Gas Type") � NG | � LPG
CH set point (par. 3) :
Other:
Heating control programmed, notes:
� Documented the modified settings of the heating control in the control operating/ installation instructions
The following work has been carried out:
� Electrical connections checked, notes:
� Condensate trap filled
� Proper operation of all modes and settings check carried out
� Venting installed and secured properly per the vent manufacturer instructions
Commissioning includes checking the settings, a visual heating leak test and a functional check of the boiler and control. The system
installer conducts a test of the heating system.
This system has been checked to the extent described.
Name of service installing contractor
Date, system installer's signature
DHW set point (par. 48) :
� Carry out a combustion air/flue gas test
� Leak test carried out on the gas and water sides
The documents have been handed over to the home owner/op-
erator. The home owner/operator has been instructed regarding
safety and operation of the boiler and accessories, including the
need for regular scheduled maintenance.
Date, owner/operator signature
Affix the test report here.
44