Yamaha SX500D Supplementary Service Manual page 98

CABLE ROUTING
600/700
Fasten the carburetor switch, wa-
1
ter temperature sensor lead, cool-
ant hose, wire lead and battery
negative lead with a plastic clamp.
Clamp
2
Carburetor switch coupler
3
Fasten the wire lead, battery
4
negative lead and coolant hose
with a plastic clamp.
Cap (without electric starter
5
model)
Fasten the coolant hose with a
6
plastic clamp.
Does not kink.
7
Route the battery lead along the
8
behind coolant hose.
Fasten the wire lead, battery
9
negative lead and coolant hose
with a plastic clamp.
Starter relay sub lead (electric
10
starter model)
Wire lead (electric starter model)
11
Wire negative lead (electric
12
starter model)
Brake hose
13
To battery negative terminal
14
To starter relay (electric starter
15
model)
To reverse gear
16
Gear position switch coupler
17
(electric starter model)
Route the main switch harness
18
along the under of the oil and fuel
breather hose.
Route the parking brake cable
19
along the under of the oil breath-
er hose.
Main switch assembly
20
Starter cable assembly
21
Oil pump cable
22
Throttle cable
23
Variable resistor
24
Oil level gauge
25
Variable resistor coupler
26
Carburetor heating lever
27
Coolant hose
28
Speedometer cable
29
Drive V-belt guard bracket
30
Under 50 mm (1.97 in)
31
Fasten the speedometer cable
32
and wire harness with a plastic
clamp.
CABLE ROUTING
–94–
SPEC