Table of Contents
Advertisement
BRAKE
2. Install:
S Brake pads
S Pad spring
Installation steps:
S Connect a suitable hose 1 tightly to the cali-
per bleed screw 2 . Put the other end of this
hose into an open container.
S Loosen the caliper bleed screw and push the
pistons into the caliper with the finger.
S Tighten the caliper bleed screw 2 .
Bleed screw 2 :
6 Nm (0.6 mSkg, 4.3 ftSlb)
S Install the brake pads and pad spring.
NOTE:
The tangs a of the pad spring must point in the
direction of the disc rotation.
3. Inspect:
S Brake fluid level
4. Check:
S Brake lever operation
A soft or spongy feeling ! Bleed brake sys-
tem.
–40–
POWR
TR
Advertisement
Table of Contents
