Yamaha SX500D Supplementary Service Manual page 108

Voltage regulator
37
Rectifire regulator
38
Back buzzer coupler (for model
39
with reverse)
Back buzzer coupler (for model
40
without reverse)
Fasten the wire harness with a
41
plastic clamp.
Gear position switch (for model
42
without reverse)
Brake hose holder
43
Fasten the wire harness with a
44
plastic clamp.
To the reverse gear
45
Gear position switch (for model
46
with reverse)
Dose not kink.
47
Fasten the wire harness, fuel
48
breather hose and oil breather
hose with a plastic clamp.
Main switch assembly
49
Starter (choke) lever assembly
50
Install the starter lever to the
51
position as illustrated.
Mark
52
CABLE ROUTING
–104–
SPEC