Table of Contents
Advertisement
DD+DIS160.02E
Edition 1, Revision 12
HOME
(4) Loosen 3 screws at
each side of the
upper front cover (1)
(5) Draw off the lower
front cover while
lifting it a bit (3)
Do not bend
(6) Unpack and check
the accessory kit
according to the
assembly checklist
3 cone pointed hex screws for fastening the brake-cable are attached with
tape to the sprocket holder
(7) Secure slide wagon
in lower locking
position by means of
2 slide wagon
locking screws.
ADC System Components
(Type 4406)
Accessories
3mm allen key
Figure 4
Figure 5
Chapter 6 / 9
Advertisement
Table of Contents
