D-Link DIR-410 User Manual page 72

M2m 3g vpn router
Table of Contents

Advertisement

G.
Why does my 3G connection keep dropping?
Please check 3G signal strength from your ISP in your environment is above middle
level.
4 Something wrong with the wireless connection?
A.
Can't setup a wireless connection?
I.
Ensure that the SSID and the encryption settings are exactly the same to the
Clients.
II.
Move the WiFi Combo VPN Router and the wireless client into the same room,
and then test the wireless connection.
III.
Disable all security settings such as WEP, and MAC Address Control.
IV.
Turn off the WiFi Combo VPN Router and the client, then restart it and then turn
on the client again.
V.
Ensure that the LEDs are indicating normally. If not, make sure that the power and
Ethernet cables are firmly connected.
VI.
Ensure that the IP Address, subnet mask, gateway and DNS settings are correctly
entered for the network.
VII. If you are using other wireless device, home security systems or ceiling fans,
lights in your home, your wireless connection may degrade dramatically. Keep
your product away from electrical devices that generate RF noise such as
microwaves, monitors, electric motors...
B.
What can I do if my wireless client can not access the Internet?
I.
Out of range: Put the router closer to your client.
II.
Wrong SSID or Encryption Key: Check the SSID or Encryption setting.
III.
Connect with wrong AP: Ensure that the client is connected with the correct
Access Point.
i. Right-click on the Local Area Connection icon in the taskbar.
ii. Select View Available Wireless Networks in Wireless Configure. Ensure you
have selected the correct available network.
iii.
Reset the WiFi Combo VPN Router to default setting
C.
Why does my wireless connection keep dropping?
I.
Antenna Orientation.
i. Try different antenna orientations for the WiFi Combo VPN Router.
ii. Try to keep the antenna at least 6 inches away from the wall or other objects.
II.
Try changing the channel on the WiFi Combo VPN Router, and your Access Point
and Wireless adapter to a different channel to avoid interference.
III.
Keep your product away from electrical devices that generate RF noise, like
72

Advertisement

Table of Contents
loading

Table of Contents