D-Link DIR-410 User Manual page 23

3.1.2 Primary Setup
First of all, you are supposed to select the WAN type and then configure the setting.
A. 3G
For 3G WAN Networking. The WAN fields may not be necessary for your connection. The
information on this page will only be used when your service provider requires you to enter
a User Name and Password to connect with the 3G network.
Please refer to your documentation or service provider for additional information.
1. LAN IP Address: The local IP address of this device. The computer on your network
must use the LAN IP address of this device as their Default Gateway. You can change it
if necessary.
23