D-Link DIR-410 User Manual page 30

1. LAN IP Address: The local IP address of this device. The computer on your network must
use the LAN IP address of this device as their Default Gateway. You can change it if
necessary.
2. 3G Failover: When the 3G connection is interrupted, the connection of router would
automatically shift to wired line.
3. IP Mode: Please check the IP mode your ISP assigned, and select "Static IP Address" or
"Dynamic IP Address".
4. IP Address and Subnet Mask: The private IP address and subnet mask your ISP
assigned to you.
5. WAN Gateway IP and Server IP Address/Name: The IP address of the L2TP server and
designated Gateway provided by your ISP.
6. L2TP Account and Password: The account and password your ISP assigned to you. If
you don't want to change the password, keep it blank.
7. Maximum Idle Time: The time of no activity to disconnect your L2TP session. Set it to
zero or enable "Auto-reconnect" to disable this feature. If Auto-reconnect is enabled, this
device will connect with ISP automatically, after system is restarted or connection is
dropped.
8. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing
packets.
30