Table of Contents
Advertisement
1. VPN-L2TP Client: Click "enable" to enable VPN-L2TP Client function.
2. Name: The name of tunnel.
3. Peer IP/Domain: Input the L2TP Server IP or domain name.
4. User Name: The account your ISP assigns to you.
5. Password: The password your ISP assigns to you.
6. Peer Subnet: Enter peer subnet.
7. Connect: The way of triggering VPN connection. There are three modes to select:
On-demand: The device will link up with ISP when the clients send outgoing packets.
Auto (Always-on): The device will link with ISP until the connection is established.
Manually: The device will not make the link until someone clicks the connect-button
in the Status-page.
8. Option:
MPPE: The MPPE
NAT: The Nat Traversal supports.
Afterwards, click on "Save" to store your settings or click "Undo" to give up the changes.
3.3.8 VPN-L2TP Server
encryption supports.
54
Advertisement
Table of Contents
