Table of Contents
Advertisement
syslog (UDP) and SMTP(TCP). The items you have to setup include:
1. IP Address for Syslog: Host IP of destination where syslog will be sent to. Check Enable
to enable this function.
2. Setting of Email alert: Check if you want to enable Email alert (send syslog via email).
3. SMTP Server: Port: Input the SMTP server IP and port, which are connected with ':'. If
you do not specify port number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
4. SMTP Username: Enter the Username offered by your ISP.
5. SMTP Password: Enter the User name offered by your ISP.
6. E-mail Addresses: The recipients are the ones who will receive these logs. You can
assign more than 1 recipient, using ';' or ',' to separate these email addresses.
7. E-mail Subject: The subject of email alert is optional.
Afterwards, click on "Save" to store your settings or click "Undo" to give up the changes.
3.4.2 Dynamic DNS
To host your server on a changing IP address, you have to use dynamic domain name service
(DDNS). Therefore, anyone wishing to reach your host only needs to know the name of it.
Dynamic DNS will map the name of your host to your current IP address, which changes each
time you connect your Internet service provider.
Before you enable Dynamic DNS, you need to register an account on one of these Dynamic
DNS servers that we list in Provider field.
1.
DDNS: Select enable if you would like to trigger this function.
60
Advertisement
Table of Contents
