D-Link DIR-410 User Manual page 27

D. PPP over Ethernet
1. LAN IP Address: The local IP address of this device. The computer on your network must
use the LAN IP address of this device as their Default Gateway. You can change it if
necessary.
2. 3G Failover: When the 3G connection is interrupted, the connection of router would
automatically shift to wired line.
3. PPPoE Account: The account your ISP assigned to you. For security, this field appears
blank. If you don't want to change the password, leave it blank.
4. PPPoE Password: The password your ISP assigned to you. For security, this field
appears blank. If you don't want to change the password, leave it blank.
5. Primary DNS: This feature allows you to assign a Primary DNS Server, contact to your
ISP to get it. (Optional)
6. Secondary DNS: This feature allows you to assign a Secondary DNS Server, you can
contact to your ISP to get it. (Optional)
7. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing
27