Table of Contents
Advertisement
5. MPPE Encryption Mode: Click ''enable" to enable MPPE Encryption Mode. Please note
that MPPE needs to work with MSCHAP authentication method.
6. Encryption length: There are three kinds of encryption length, respectively 40 bits, 56
bits, and 128 bits.
7. User Name: Input the account of PPTP client.
8. Password: Input the password of PPTP password.
3.3.11
Miscellaneous Items
1. Administrator Time-out: The time of no activity to logout automatically, you may set it to
zero to disable this feature.
2. Remote Administrator Host/Port
In general, only Internet user can browse the built-in web pages to perform administration
task. This feature enables you to perform administration task from remote host. If this
feature is enabled, only the specified IP address can perform remote administration. If the
specified IP address is 0.0.0.0, any host can connect with this product to perform
administration task. You can use subnet mask bits "/nn" notation to specified a group of
trusted IP addresses for example, "10.1.2.0/24".
NOTE: When Remote Administration is enabled, the web server port will be shifted to 80.
You can change web server port to other port, too.
3. Discard PING from WAN side: When this feature is enabled, any host on the WAN
cannot ping this product.
4. DoS Attack Detection: When this feature is enabled, the router will detect and log the
DoS attack coming from the Internet. Currently, the router can detect the following DoS
attack: SYN Attack, WinNuke, Port Scan, Ping of Death, Land Attack etc.
Afterwards, click on "Save" to store your settings or click "Undo" to give up the changes.
58
Advertisement
Table of Contents
