D-Link DIR-410 User Manual page 26

C. Dynamic IP Address
1. LAN IP Address: The local IP address of this device. The computer on your network must
use the LAN IP address of this device as their Default Gateway. You can change it if
necessary.
2. 3G Failover: When the 3G connection is interrupted, the connection of router would
automatically shift to wired line.
3. Host Name: Optional, required by some ISPs, for example, @Home.
4. ISP registered MAC Address: Enter MAC address of your ISP. (Optional)
5. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing
packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the connect-button in
the Status-page.
6. NAT disable: The device would not send private IP to other LAN PC if you select disable.
26