D-Link DIR-410 User Manual page 53

packets transmitting, the VPN tunnel would disconnect.
10. Xauth: If you click "Xauth". It means that it is without Extended Authentication(xAuth). If
you. However, if you choose "Server", it will verify the legality of user information from
VPN client. The user information that is provided by VPN client needs to match to user
information that is in local user database of VPN server.
11. Set IKE Protocol: Click "enable" to set IKE Protocol. The default value will be used if this
option is disabled.
12. Encryption/Authentication/DH Group: Select appropriate encryption, authentication
and DH Group
Press "XAUTH" account and you could configure Xauth account and password in this
section.
Afterwards, click on "Save" to store your settings or click "Undo" to give up the changes or click
"back" to go back to the original page.
3.3.7 VPN-L2TP Client
53